PLATING AND PROCESS TANKS
Tanks
3G TECH designs and manufactures a full line of high quality plating tanks. With over 45 years of manufacturing experience in
meeting customer requirements, you are guaranteed the finest, most reliable tanks on the market today. Whether its stainless steel or polypropylene,
3G TECH can fill your every need.
3G TECH is now offering polypropylene tanks with the super strong extrusion welding technique to its manufacturing capabilities. The tanks continuos weld
technique provides a near indestructible joint, virtually eliminating the point of connection as a potential site for breakdown, as with conventional fusion
weld techniques.
|
Polypropylene Tanks Series PP Our top tank for the ultimate in versatility. Constructed from stress relieved polypropylene, these rigid self-supporting tanks are double welded. Chemically resistant to most solutions. And the Heavy duty construction provides years of trouble free performance. This polypropylene tank features 2 copper anode rods (interconnected) mounted in Lucite insulating mounts, 1 cathode rod agitator, 1 stainless steel immersion heater with 1 temperature control and liquid level sensor heater shut-off, and 1 sealess vertical pump. This unit also comes with a built-in rectangular exhaust hood for ventilation. |
|
 |
Lined Steel Tanks Series LS Recommended for acid pickling solutions up to 150° F ammonium persulphate solutions, and all plating solutions up to 150° F (acid or alkaline). Black PVC linings are recommended for most applications. However, white PVC is preferred for precious metal plating solutions. Linings quoted are 3/32" thick. Thicker linings are recommended for very corrosive or strongly oxidizing solutions. |
|
Stainless Steel Tanks Series ST For alkaline cleaning, plating, rinsing and special applications. Constructed of 11, 14, or 16 gauge high quality 304 stainless steel for long lasting wear. They are recommended for nitric acid solutions, hot rinse tanks, high temperature applications (above 150° F) such as hot seal tanks after anodizing, and for corrosive solutions. They are not intended for use with hydrochloric or hydrofluoric acids.
|
 |
 |
Steel Tanks Series S Recommended for soak cleaning, electrocleaning, alkaline plating solutions, and other non-corrosive applications. Constructed from quality grade sheet steel from 16-gauge to 1/4" for years of dependable service. All tanks are painted outside with acid and alkali resistant paint and all corners are deburred. Tanks of 11 gauge and thicker are double welded. |
Standard Accessory Groups for
|
Steel Tanks - Series S Lined Steel Tanks - Series LS Stainless Steel Tanks - Series ST Polypropylene Tanks - Series PP (Group D shown) |
|
Group A
Two copper anode rods (interconnected) and one copper cathode rod mounted in Lucite insulating mounts with stainless steel fittings.
Group B
One stainless steel immersion heater and one non-indicating temperature control with liquid level sensor heater shutoff. Other heater materials are available.
Group C
Two copper anode rods (interconnected) mounted in Lucite insulating mounts, one copper cathode rod on polypropylene rollers, and one cathode rod agitator.
Group D
Two copper anode rods (interconnected), one copper cathode rod mounted in Lucite insulating mounts with stainless steel fittings, with one stainless steel
immersion heater and one temperature control with liquid level sensor heater shut-off.
Group E
Two copper anode rods (interconnected) mounted in Lucite insulating mounts, one copper cathode rod on polypropylene rollers, one cathode rod agitator,
one stainless steel immersion heater and one temperature control with liquid level sensor heater shut-off.
Sinks
3G TECH manufactures tanks and sinks in a virtually unlimited range of sizes and shapes. While all tanks may appear to be the same,
there are important details that do not readily meet the eye. This is why a tank manufacturer's reputation is an important factor in your purchasing decision.
And this is why you will want an HBS tank.
|
Polypropylene Sinks Series PS These unique sink units are ideally suited for scrubbing and rinsing printed circuit boards or any other lightweight materials. Sink assemblies feature splashboards, sloped drainboards, and heavy duty triangular legs. |
|
|
|
Spray Rinse and Sink Combinations Series PSR Here's everything within immediate reach for rinsing circuit boards and other intricate components. Offers the same outstanding features as the series PS Sinks but with a spray rinse tank added. |
